Common Failures of CHANGAN 1303015W10 Radiator fixing adhesive for CS35/Alsvin
- Poor Adhesion: Some CS35 and Alsvin owners with OE number 1303015W10 radiator fixing adhesive reported that it fails to bond well, causing radiator looseness.
- Premature Drying: The adhesive may dry out too quickly during installation, reducing its effectiveness.
- Adhesive Aging: Over time, the radiator fixing adhesive with OE 1303015W10 in CS35 and Alsvin can age and lose its stickiness.
Maintenance Tips of CHANGAN 1303015W10 Radiator fixing adhesive for CS35/Alsvin
- Firstly, before applying the CHANGAN CS35/Alsvin radiator fixing adhesive (OE# 1303015W10), clean the radiator surface thoroughly to ensure better adhesion. Remove any dirt, grease, or rust.
- Secondly, stir the adhesive well. This adhesive has good fluidity, but proper stirring can enhance its performance and ensure uniform bonding.
- Next, apply the adhesive evenly on the fixing points. A thin and consistent layer can provide sufficient strength without excessive waste.
- Then, assemble the radiator parts promptly after applying the adhesive. Do not let it dry before installation to maintain its bonding ability.
- Finally, allow sufficient curing time according to the product instructions. Usually, it takes a few hours to reach full strength.
Warning: The CHANGAN radiator fixing adhesive contains chemicals. Avoid direct contact with skin and eyes. Wear protective gloves and goggles during installation.