Common Failures of MG 11664144 Rubber strip for MG5
- Weathering and Hardening: The rubber strip (OE 11664144) on many MG5 cars becomes hard due to long - term exposure to sunlight and harsh weather.
- Sealing Failure: Some MG5 owners report that the rubber strip fails to seal properly, allowing water to leak into the car.
- Cracking and Tearing: Over time, the rubber strip on MG5 may crack or tear, affecting its normal function.
Maintenance Tips of MG 11664144 Rubber strip for MG5
- First, clean the installation area of the MG5 thoroughly to ensure the rubber strip (OE# 11664144) adheres well. Remove any dirt or debris.
- Measure the length accurately before cutting the MG rubber strip. It's better to cut it slightly longer and trim later.
- When installing, start from one end and press the rubber strip firmly along the edge of the MG5, avoiding wrinkles or bubbles.
- Ensure the rubber strip fits tightly into the groove. You can use a plastic tool to help with the installation for a better fit.
- After installation, check the sealing performance of the rubber strip. It should effectively prevent water and dust from entering the MG5.
Sharp Edge Warning – The edges around the installation area of the MG5 might be sharp. Wear protective gloves to avoid cuts during installation.