Common Failures of BYD 1243655400 Hazard light switch for eT3
- Switch Malfunction: Many eT3 owners with OE number 1243655400 report that the hazard light switch fails to turn on or off properly.
- Intermittent Operation: The hazard light switch of eT3 may work intermittently, causing the hazard lights to flash irregularly.
- Poor Contact: Due to wear and tear, the hazard light switch with OE 1243655400 often has poor contact issues.
Maintenance Tips of BYD 1243655400 Hazard light switch for eT3
- First, ensure the vehicle is turned off before starting to replace the BYD eT3 hazard light switch (OE# 1243655400). This prevents electrical shock and accidental activation of the lights.
- Locate the hazard light switch on the dashboard. Usually, it's in a central and easily accessible position. For the BYD eT3, refer to the owner's manual if you're unsure.
- Disconnect the electrical connector from the old switch carefully. Pull it straight out to avoid damaging the pins. Make sure to note the orientation for correct reinstallation.
- Remove the old hazard light switch by unscrewing any retaining screws. Keep these screws in a safe place for reuse.
- Install the new BYD hazard light switch (OE# 1243655400) in the reverse order of removal. Ensure it fits snugly and is properly aligned.
Electrical Shock Warning – Always disconnect the battery before working on the hazard light switch to prevent electrical shock and short - circuits.