Common Failures of CHANGAN 3505100MK01BN01 Brake master cylinder for Eado/Eado Plus
- Leakage Issue: The brake master cylinder with OE number 3505100MK01BN01 in Eado/Eado Plus often experiences leakage, which can reduce braking efficiency.
- Internal Seal Wear: Over time, the internal seals of the brake master cylinder in Eado/Eado Plus may wear out, leading to a spongy brake pedal.
- Pressure Loss: The 3505100MK01BN01 brake master cylinder might cause pressure loss, resulting in poor braking performance.
Maintenance Tips of CHANGAN 3505100MK01BN01 Brake master cylinder for Eado/Eado Plus
- First, ensure the vehicle is on a stable surface and the parking brake is engaged before starting to work on the CHANGAN Eado/Eado Plus brake master cylinder (OE# 3505100MK01BN01).
- Next, carefully drain the brake fluid from the reservoir to avoid spills. The brake fluid in this CHANGAN model should meet the specified DOT rating.
- Then, disconnect the hydraulic lines from the brake master cylinder. Use appropriate wrenches to prevent damage to the fittings.
- When installing the new brake master cylinder, align it properly with the mounting holes. Make sure all bolts are tightened to the recommended torque values.
- After installation, bleed the brake system thoroughly to remove any air bubbles. This step is crucial for the proper functioning of the brakes in the CHANGAN Eado/Eado Plus.
Brake Fluid Hazard Warning – Brake fluid is corrosive. Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical attention.