Common Failures of CHERY A135205130BA Wiper arm for TIGGO3X/TIGGO2/Celer Hatchback/Celer Sedan Facelift
- Wiper Arm Loosening: A common issue in TIGGO3X, TIGGO2, Celer Hatchback and Celer Sedan Facelift models with OE number A135205130BA, leading to unstable wiping.
- Wiper Arm Breakage: Some users of these vehicles reported that the wiper arm with this OE number may break, especially during heavy snow.
- Inadequate Contact: The wiper arm A135205130BA might have poor contact with the windshield, causing incomplete wiping.
Maintenance Tips of CHERY A135205130BA Wiper arm for TIGGO3X/TIGGO2/Celer Hatchback/Celer Sedan Facelift
- First, locate the wiper arm on your CHERY TIGGO3X, TIGGO2, Celer Hatchback, or Celer Sedan Facelift. Make sure the wiper switch is off before starting the removal process.
- To remove the CHERY wiper arm with OE number A135205130BA, press the release tab on the wiper arm where it connects to the wiper motor. This allows you to lift the arm off easily.
- When installing the new wiper arm, align it correctly with the wiper motor shaft. Ensure a snug fit to prevent wobbling during operation.
- Check the tension of the CHERY wiper arm. It should press firmly against the windshield for effective wiping. Adjust if necessary.
- After installation, test the wipers on your CHERY vehicle. Make sure they move smoothly across the windshield and clean it properly.
Warning: Do not force the wiper arm onto the shaft. Forcing it can damage the wiper motor or the arm itself, especially for the CHERY wiper arm with OE number A135205130BA.