Common Failures of BYD 1222579900 Door weatherstrip for Qin PLUS DM-i/KING DM-i/Chazor DM-i/Seal5 DM-i/Destroyer 05 DM-i
- Weatherstrip Loosening: In Qin PLUS DM - i and other models with OE number 1222579900, the door weatherstrip may loosen over time, causing wind noise.
- Sealing Failure: Many users of Chazor DM - i and Seal5 DM - i report that the door weatherstrip fails to seal properly, leading to water leakage during rain.
- Cracking in Cold Weather: In winter, the door weatherstrip of Destroyer 05 DM - i with OE 1222579900 often cracks.
Maintenance Tips of BYD 1222579900 Door weatherstrip for Qin PLUS DM-i/KING DM-i/Chazor DM-i/Seal5 DM-i/Destroyer 05 DM-i
- First, ensure the door surface is clean. Before installing the BYD door weatherstrip (OE# 1222579900), use a cleaner to remove dirt and debris from the Qin PLUS DM-i, King DM-i, Chazor DM-i, Seal5 DM-i, or Destroyer 05 DM-i door frame.
- Measure the length accurately. Cut the weatherstrip according to the specific length of the door in these BYD models to avoid over - or under - fitting.
- Start from one corner. Begin the installation at a corner of the door and gradually press the weatherstrip into place along the door frame, making sure it adheres firmly.
- Check for gaps. After installation, inspect for any gaps between the weatherstrip and the door frame, and adjust it if necessary to ensure a tight seal.
- Test the door operation. Open and close the door several times to confirm that the weatherstrip doesn't interfere with the normal operation of the door in these BYD vehicles.
Sharp Edge Warning – The door frame may have sharp edges. Wear protective gloves during the installation of the BYD door weatherstrip (OE# 1222579900) to prevent cuts.