Common Failures of CHERY F4J161006030 Camshaft position sensor for TIGGO8 PRO PHEV/TIGGO8 PRO/TIGGO8/TIGGO7/TIGGO7 PRO
- Erratic Engine Performance: Many TIGGO8 PRO PHEV owners have noticed engine misfires due to the Camshaft position sensor (OE: F4J161006030) malfunctioning.
- Starting Difficulties: Some TIGGO7 and TIGGO7 PRO drivers face issues starting their cars when the Camshaft position sensor fails to send accurate signals.
Maintenance Tips of CHERY F4J161006030 Camshaft position sensor for TIGGO8 PRO PHEV/TIGGO8 PRO/TIGGO8/TIGGO7/TIGGO7 PRO
- First, before replacing the CHERY Camshaft position sensor (OE# F4J161006030) on TIGGO8 PRO PHEV/TIGGO8 PRO/TIGGO8/TIGGO7/TIGGO7 PRO, disconnect the battery to prevent electrical shocks.
- Next, locate the sensor, usually near the camshaft. Clean the surrounding area to avoid debris entering the engine during installation.
- Then, carefully remove the old sensor by loosening the mounting bolts. Take note of its position and orientation for correct reinstallation.
- After that, apply a small amount of anti - seize compound to the new sensor's threads before installing it. This helps with future removal.
- Finally, connect the electrical connector securely and start the engine to check if the sensor is working properly.
Warning: Do not overtighten the mounting bolts of the CHERY Camshaft position sensor (OE# F4J161006030) as it may damage the sensor or the engine block.