Common Failures of CHERY J688402228 Hood rubber strip for TIGGO8 PRO PHEV/TIGGO8 PRO/TIGGO8/TIGGO7/TIGGO7 PRO/TIGGO5X/TIGGO5X PRO
- Peeling and Detachment: In many Chery TIGGO series models like TIGGO8 PRO PHEV, the J688402228 hood rubber strip often peels off, affecting the sealing effect.
- Hardening and Cracking: Due to long - term exposure to sunlight and harsh weather, the hood rubber strip J688402228 in TIGGO models can harden and crack, losing its shock - absorbing function.
Maintenance Tips of CHERY J688402228 Hood rubber strip for TIGGO8 PRO PHEV/TIGGO8 PRO/TIGGO8/TIGGO7/TIGGO7 PRO/TIGGO5X/TIGGO5X PRO
- First, clean the hood surface thoroughly before installing the CHERY hood rubber strip (OE# J688402228). Dirt or debris can prevent proper adhesion.
- Measure the length of the hood accurately to ensure the rubber strip fits perfectly. This is crucial for TIGGO8 PRO PHEV, TIGGO8 PRO, and other listed models.
- Peel the backing off the rubber strip slowly, starting from one end. Then, carefully press it onto the hood, following the edge.
- Use a roller or your hand to apply even pressure along the strip, eliminating any air bubbles. This helps the strip adhere better and last longer.
- Check the alignment of the rubber strip regularly during installation to make sure it's straight and properly positioned on the CHERY TIGGO series vehicles.
Caution: The adhesive on the CHERY hood rubber strip can be strong. Avoid getting it on your skin or clothes as it may be difficult to remove.