Common Failures of CHERY 502000245AADYJ Roof beam for TIGGO8 PRO PHEV/TIGGO8 PRO/TIGGO8/TIGGO5X/TIGGO5X PRO
- Corrosion of the Roof Beam: A common issue in TIGGO8 PRO PHEV and other models with OE number 502000245AADYJ, often due to long - term exposure to moisture.
- Loose Mounting: Some TIGGO5X and TIGGO5X PRO owners have reported that the roof beam with OE 502000245AADYJ becomes loose, causing abnormal noises while driving.
Maintenance Tips of CHERY 502000245AADYJ Roof beam for TIGGO8 PRO PHEV/TIGGO8 PRO/TIGGO8/TIGGO5X/TIGGO5X PRO
- First, ensure the CHERY TIGGO series vehicle is parked on a flat surface. When replacing the Roof beam (OE# 502000245AADYJ), use proper lifting equipment to access the installation area safely.
- Next, remove the old Roof beam carefully. Check for any rust or damage around the mounting points on the TIGGO8 PRO PHEV/TIGGO8 PRO/TIGGO8/TIGGO5X/TIGGO5X PRO. Clean these areas before installing the new beam.
- Then, align the new CHERY Roof beam precisely with the mounting holes. Use the correct size of bolts and tighten them gradually in a criss - cross pattern to ensure even pressure.
- After installation, check the alignment of the Roof beam again. Make sure it is flush with the surrounding bodywork of the TIGGO models.
- Finally, test the integrity of the installation by gently applying pressure on the Roof beam to ensure it is firmly fixed.
Warning: Do not overtighten the bolts when installing the CHERY Roof beam (OE# 502000245AADYJ). Over - tightening can cause damage to the beam or the vehicle's body structure.