Common Failures of HAVAL 5006410XSZ08A Door Strip for H2 1.5L 6MT FWD/H2 1.5L 6MT AWD/H2 1.5L 6AT FWD/H2 1.5L 7AT FWD
- Peeling and Detachment: The Door Strip (OE 5006410XSZ08A) on H2 1.5L models often peels off, mainly due to long - term sun exposure.
- Sealing Failure: Many H2 1.5L owners report that the Door Strip fails to seal well, causing wind noise during driving.
- Cracking: Cracks may appear on the Door Strip of H2 1.5L vehicles over time, especially in cold weather.
Maintenance Tips of HAVAL 5006410XSZ08A Door Strip for H2 1.5L 6MT FWD/H2 1.5L 6MT AWD/H2 1.5L 6AT FWD/H2 1.5L 7AT FWD
- First, ensure the car is parked safely. When replacing the HAVAL H2 Door Strip (OE# 5006410XSZ08A), clean the door surface thoroughly to remove dirt and grease, which helps with better adhesion.
- Measure the length of the door carefully before cutting the Door Strip. This ensures a perfect fit for the HAVAL H2 models including 1.5L 6MT FWD, etc.
- Peel off the backing of the Door Strip slowly and align it precisely with the door edge. Start from one end and press it firmly as you go.
- Use a plastic squeegee to smooth out any air bubbles trapped under the Door Strip. This makes the installation look neater for your HAVAL H2.
- Check the edges of the installed Door Strip to ensure it is well - attached and there are no loose ends. A properly installed Door Strip can enhance the car's appearance and protect the door.
Sharp Edge Warning – The edges of the Door Strip might be sharp. Wear gloves during installation to prevent cuts.