Common Failures of CHERY 808000254AA Multifunction switch for TIGGO8 PRO PHEV/TIGGO8 PRO/TIGGO8/TIGGO7/TIGGO7 PRO/TIGGO5X/TIGGO5X PRO
- Function Malfunction: In TIGGO series like TIGGO8 PRO PHEV, the multifunction switch (OE 808000254AA) may fail to operate certain functions, such as turn signals or windshield wipers.
- Intermittent Contact: Some TIGGO7 and TIGGO5X users report intermittent contact issues with the 808000254AA multifunction switch, causing functions to work erratically.
Maintenance Tips of CHERY 808000254AA Multifunction switch for TIGGO8 PRO PHEV/TIGGO8 PRO/TIGGO8/TIGGO7/TIGGO7 PRO/TIGGO5X/TIGGO5X PRO
- First, ensure the vehicle is off before starting the replacement of the CHERY multifunction switch (OE# 808000254AA). This prevents electrical short - circuits.
- When removing the old switch from TIGGO8 PRO PHEV or other models, gently pry the housing open using a suitable tool to avoid damage.
- Clean the contact points on the steering column where the multifunction switch will be installed. A clean surface ensures better electrical connection.
- During installation, align the switch precisely with the mounting holes in TIGGO series vehicles. Incorrect alignment can lead to malfunction.
- Test the new multifunction switch immediately after installation. Check all functions like turn signals, wipers to confirm proper operation.
Warning: Do not over - tighten the mounting screws of the CHERY multifunction switch. Over - tightening can crack the housing and cause switch failure.