Common Failures of HAVAL 2914200XKZ16B Control arm for H6 Coupe 2.0L 6MT FWD/H6 Coupe 2.0L 6AT FWD/H6 Coupe 2.0L 6MT AWD/H6 Coupe 1.5L 7AT/H6 Coupe 1.5L 6MT/F7 1.5L/F7 2.0L FWD/F7 2.0L AWD/F7x 1.5L/F7x 2.0L FWD/F7x 2.0L AWD/M6 6MT/M6 6AT/M6 7AT/F5 1.5L 7AT/H4 1.5L 7AT FWD/H4 1.5L 6MT FWD/H6 I 1.5L Petrol 6MT FWD/H6 II 1.5L 6MT FWD/H6 I 1.5L Petrol 6AT FWD/H6 II 1.5L 7AT FWD/H6 I 1.5L Petrol 6MT AWD/H6 I 2.0L Diesel 6MT FWD/H6 I 2.0L Diesel 6MT AWD/H6 II 2.0L 7AT FWD
- Bushing Wear: The control arm (OE: 2914200XKZ16B) bushing in H6 Coupe and F7 models often wears out, causing abnormal noises and affecting steering stability.
- Ball Joint Looseness: High - mileage vehicles like M6 and F5 with this control arm may experience ball joint looseness, leading to uneven tire wear.
Maintenance Tips of HAVAL 2914200XKZ16B Control arm for H6 Coupe 2.0L 6MT FWD/H6 Coupe 2.0L 6AT FWD/H6 Coupe 2.0L 6MT AWD/H6 Coupe 1.5L 7AT/H6 Coupe 1.5L 6MT/F7 1.5L/F7 2.0L FWD/F7 2.0L AWD/F7x 1.5L/F7x 2.0L FWD/F7x 2.0L AWD/M6 6MT/M6 6AT/M6 7AT/F5 1.5L 7AT/H4 1.5L 7AT FWD/H4 1.5L 6MT FWD/H6 I 1.5L Petrol 6MT FWD/H6 II 1.5L 6MT FWD/H6 I 1.5L Petrol 6AT FWD/H6 II 1.5L 7AT FWD/H6 I 1.5L Petrol 6MT AWD/H6 I 2.0L Diesel 6MT FWD/H6 I 2.0L Diesel 6MT AWD/H6 II 2.0L 7AT FWD
- First, before replacing the HAVAL control arm (OE# 2914200XKZ16B), ensure the vehicle is properly lifted and supported on jack stands for safety. This applies to models like the H6 Coupe and F7.
- Next, remove the old control arm carefully. Check for any signs of wear or damage on the bushings and ball joints of the old control arm. If they are worn, it's a good idea to replace them with new ones at the same time.
- When installing the new control arm, align the mounting holes precisely. Use the correct torque specifications for the bolts. Incorrect torque can lead to premature failure of the control arm.
- After installation, perform a wheel alignment. This is crucial for models such as the H6 and M6 to ensure proper handling and tire wear.
- Finally, test drive the vehicle to check for any abnormal noises or handling issues. This will confirm that the control arm installation was successful.
Warning: Do not over - tighten the control arm bolts as it can cause deformation of the control arm and affect the vehicle's suspension performance.